Have kenwood dishwasher kdw60x10 and suddenly wont power up. no buttons or display. checked door switch ok. floor flood switch ok. water input valve on 240v leds ok. control board fuse ok and has 240v on PCB.
what are common faults if no start up.
tks
Hi Les,
The most likely cause, considering the steps and checks you have made already, would be a failed control board. This is a common failure for these machines and as such, the replacement part is quite easily available and not too expensive at about £50
Rupert
April 2020
fuse in the plug?
Michael Farrelly
April 2020
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
