Recent: Find the charger or how to convert the battery?

Mend Fisher and Paykel 608 Washing Machines

Mend Household Appliances, Washing Machines
Find out how to mend it for free.
Ask Question
Mend Household Appliances, Washing Machines
Free repair help for Fisher and Paykel 608 washing machines

Mend washing machines ...

Mend machine start appliance
1

Not starting until I bang door closed?

After I load, and close door, it will not start unless I bang on the door near lock a few times. Hotpoint Aqua... [Read more]
Mend washing faulty valve
2

Miele W800 novotronic washing machine?

Hi i have a Miele W800 novotronic with a faulty triple inlet valve which is connected with a four pin connecto... [Read more]
Mend lg washer cycle code

Programme timer?

Lg intello washer WM1480FHD Programme stop 3 minutes into cycle, whatever cycle. No error code, just switches... [Read more]
Mend Household Appliances, Washing Machines
1

Washing programme stops after 3 minutes?

LG intellowasher WM1480FHD Does one complete wash, then on second it starts to wash then stops 3 minutes into ... [Read more]
Mend Household Appliances, Washing Machines

Lg 7kg dd?

I have a problem with the electronic door catch & have to push the contacts back & forward then it works. Are... [Read more]
Mend Washing Machines

Mend > Washing Machines

Mend Fisher and Paykel 608 Smart Drive

Fisher and Paykel smart drive 608 6.5kg control module problem?

The unit has a mustard coloured module with a 4Amp 240V PCB mounted Fuse just after the 240V mains power input. This fuse has gone bang.

Can someone help me with what the resistance values of the wires connecting to this module to find out if fault is a pump or a coil etc

If there are any other suggestions they would be greatly appreciated.

David
February 2007
Fisher and Paykel 608Household Appliances, Washing MachinesFisher Smart Drive
Check the resistance of all loads that are external to the module. If the module does not show physical signs of damage I would would carry out a resistance check on solenoids, motor, drain pump,etc.
The root cause of the fuse blowing may be either a load fault (a short or very low resistance) or an earth fault.

garryk
February 2007
Mend Household Appliances, Washing Machines
Free repair help for Fisher and Paykel 608 washing machines
Mend fisher turn machine

My Fisher and Paykel Excellence 7.5 Smart Drive won't fill with water?
Mend washing error code

washing machines GW612 Fisher and Paykel?
Mend fisher paykel thought

Fisher and Paykel?
Mend fisher filling water

Fisher and Paykel MW511?
Mend fisher paykel top

Loud Noise at Spin Cycle Fisher and Paykel Eco Intuitive?
Mend smart washing machine

Fisher and Paykel smart drive 701 washing machine?
Mend working day fisher

I have no power ,the machine was working the day before ?
Mend hello fisher drive

What is causing this?
Mend washing machine fisher

How can I fix my F&P MW512NZ washing machine that wont spin?
Mend lights power change

Fisher and Paykel Excellence lights are on but nobodys home( does nothing?
Mend spin cycle problem

spin cycle problem?
Mend fisher paykel power

Fisher and Paykel no power?

Other models...

Fisher and Paykel 701Fisher and Paykel EcosmartFisher and Paykel GW611Fisher and Paykel GW709AUFisher and Paykel GWL55Fisher and Paykel GWL75Fisher and Paykel IW610Fisher and Paykel IW810auFisher and Paykel PW55Fisher and Paykel WA###Fisher and Paykel WA6500Fisher and Paykel WM2490P1

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.

Related Categories

Mend Knitting Machines
Knitting Machines
Mend Sewing Machines
Sewing Machines
Mend Stairlifts
Stairlifts
Mend Steam Cleaners
Steam Cleaners
Mend Steam Irons
Steam Irons
Mend Tumble Dryers
Tumble Dryers
Mend Vacuum Cleaners
Vacuum Cleaners

Mend Household Appliances, Washing Machines
Free repair help for Fisher and Paykel 608 washing machines

Try fixfault.com to fix washing machines.