make sure to put upward pressure on the bar while you adjust chain tension.otherwise the pressure will push the bar loose as you cut.use thread locking compound on the studs if the nuts wont remain tight.
dan
July 2008
Re: Ted's comment. Make sure the lock nut behind the adjustment screw is in place.
Ken
April 2008
loosen the 7/16th inch nut that holds the bar on. there is an adjustment screw in the front behind the bar. snug it up and then tighten the nut again.
Ted
April 2008
Yes? I have
Milan Motl
March 2008
Keep tightening it.....
Louie
January 2008
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
