GHD hair straighteners MK 3?

you need 2 star screw drivers turn them differant ways

isabel boyle
August 2009

HI,IF THE SCREWS ARE TOO TIGHT YOU RISK DAMAGING THE HEADS AND THEN YOU WILL HAVE PROBLEMS,AN ALTERNATIVE WAY IS TO UNSCREW THE TINY BLACK SCREWS NEAR THE SWITCH.YOU WILL NEED A BENT HEAD SCREW DRIVER FOR THIS,ITS A SMALL PRECISION SCREW DRIVER WITH AN ANGLED HEAD(I MADE ONE BY BENDING A CHEAP SCREWDRIVER!),YOU WILL THEN BE ABLE TO REMOVE THE SCREWS AND PLASTIC COVERS,IT IS A BIT TRICKY BUT THE ONLY WAY!

NEIL (NEILANDT) HAIR STRAIGHTENERS REPAIR SERVICES ON EBAY
July 2007

i can fix for you ..the screws are indeed hardas you need a lot of brute strenght for them
hi contact tony m on mrfire@fsmail.net or msn him deckdemon@hotmail.co.uk for more info on repairs thanks

tony m
May 2007