Recent: Throttle issue?

Mend Snapper Lawn Mowers

Mend Garden Tools, Lawn Mowers
Find out how to mend it for free.

Ask Question
Mend Garden Tools, Lawn Mowers
Click here to mend Snapper lawn mowers

Mend > Lawn Mowers

Mend Garden Tools, Lawn Mowers

Why is oil blowing up into my air filter?

My Snapper 12.5hp mower will start, then after a minute or so, a cloud of smoke, and the engine cuts out. I removed the air filter and witnessed oil gushing up into the filter area. What is causing this, and is there a cure?

Lenny Baldino
June 2007
The floats in these engines are extremely sensitive. Make sure that there is no sediment in the bowl. Spray after the bowl is removed w/carburtor cleaner. If this doesn't work you need a new float. Make sure that before you do all that you change the oil.

Dean
September 2011
hello,
i had the same thing happening so i rebuilt the carb, be very careful with the tiny springs in the fuel pump on the side of the carb, my diaphram was worn out so far it was constantly putting gas into the cylinders and this was causing a gas/oil mix to run out the breather tubes. but once i rebuilt the carb and adjusted it properly it stopped and it now runs like a champ

chuck
May 2008
good chance you have a blown head gasket if you still have compression.

datsello@windstream.net
December 2007
your govenor could be set too high check the ajustments of the govenor

Tim
July 2007
make sure the mower is not over filled with oil
but this is a sign of the rings bypassing

bg
June 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Up Into Filter

Mend Garden Tools, Lawn Mowers
Click here to mend Snapper lawn mowers

Other models...

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Garden Tools, Lawn Mowers
Click here to mend Snapper lawn mowers