Mend > Tumble Dryers

Crusader condenser dryer?

my dryer is not getting hot

hotpoint ultima condensing drier?

my tumble dryer is only blowing cold air, consequently it is not drying my clothes

1

how to fix my hotpoint aquarius ctd00 dryer?

Hi, My tumble dryer is not getting hot air to it when it is tumbleing,i have checked elements and they are not... [Read more]

creda simplicity tcr2 ?

how do you take the top off a creda simplicity tcr2

how can i deprogramme the drying indicator on miele novotronic tumble drier?

the alarm that acts as the drying indicator on the miele novotronic t284 must be able to be deprogrammed!! i c... [Read more]

1

we are trying to fit a new belt to the creda condensor dryer TCS3 ?

we are trying to fit a new belt to a creda condensor dryer model TCS3, we have got it around the drum and the ... [Read more]

1

zanussi washer dryer?

how do i disconnect the inbalance device

How can i fix my creda 37382 tumble dryer?

How do i gain access to the drive belt to replace with new belt

1

Hotpoint Aquarius VTD60 Fault code 8?

Appeared to be working but noticed display showed number 8. Not F8. Would not turn off so unplugged. Plugged b... [Read more]

1

how to change a belt on a beko DRCS 68W?

Burning smell coming fromt the dryer so took the back off the rubber belt has broken will the dryer work witho... [Read more]

2

drying timer goes down too quick and doesn't dry clothes?

I have a Zanussi zwd1681w washer dryer. in the drying cycle the timer goes down far too quickly (30min drying ... [Read more]

beko drcs 68w?

dryer works for a while then stops and the water tank full light starts flashing I have the water pipe going... [Read more]

Creda Dry Simplicity T520VW Dryer?

my dryer works for a few minutes then switches itself off can anyone help please

drum bangs?

the drum started making a banging noise as it goes round, then it stops, started again but slower, but now has... [Read more]

1

how can I fix a zanussi zdc 47100w tumble dryer?

My dryer will only dry on the cotton setting with the timer set. It doesn't get warm on synthetics at all or o... [Read more]

Hover 5050ED Dryer?

When the dryer goes into auto reverse the motor will not turn the drum in the opposite direction. The motor is... [Read more]

removing belt from kenmore dryer?

i would like to know how to remove the belt from a kenmore dryer to check for bad bearing thanks

my btd1 stops going round?

My Baumatic btd1 stops going round and i have to spin this to get it going but it stops going when it changes ... [Read more]

1

Not drying correctly AEG Lavatherm 37320 Electronic vented tumble dryer?

Machine operation seems normal but not drying correctly even after long period of operation. It has good warm... [Read more]

1

wires fallen out when changeing belt cant rember how they go back ?

how do i connect the three wires at the side of the drum on my hotpoint tumble dryier VTD00P can figure out wh... [Read more]