Mend > Vacuum Cleaners

1

how many fiters are there in the dc18 slim?

is there more than 1 filter in the dc18 slim vacuum the filter in the top is clean but there is still very lit... [Read more]

How do I remove the front caster wheel ?

How do I remove the front roller wheel and that part that goes with it ? There are no screws holding it and S... [Read more]

I need the part number for the Triac on KC86WBZRZ000 pcb?

I would rather replace the Triac which is blown than the entire circuit bd.. I am unable to identify the part ... [Read more]

motor for dc 08?

HOW do l open a dc 08 and replace and fit a new motot

Dyson DC07 hose not picking up?

I have a Dyson DCO7 that was in the shop and came back with great suction. Then I notced the hose was startin... [Read more]

how can i fix a band on my model 73366 vacuum?

how can i fix the rubber band that turns the brush on my vacuum cleaner model 7366. it just slips back off at ... [Read more]

how can i fix my vacuum???

I have a Hoover wind tunnel dual V. It has very little suction and is getting very hot. I have checked for clo... [Read more]

1

dyson o7 keeps cutting out?

my dco7 keeps cutting out have to wait 10 mins to cool down

Electrolux Z350/E motor is burning out is it worth repairing?

Electrolux Z350/E motor is burning out is it worth repairing

Sanyo upright/Performax 12.0?

I removed the bag cover and cannot get it to fit back on.

Laboured sound from motor?

My Henry vac is still working but with reduced suck. The motor is a bit noiser and there is a faint smell of c... [Read more]

no water to floor cleaner?

my pro heater wont send the water through to the main floor clener but will work on the hand tools

dyson dc04 over heating?

Our DC04 smelt of burning and I replaced the motor with a known working 2nd hand one from a dc07 which i'm tol... [Read more]

how do I fix replace on/off switch on mce450?

How do I remove the handle to get to the switch, I need to do this as if I move the cable, at the entry point ... [Read more]

3

how do i repair the start button on my dyson dc04?

my start button sometimes won't stay on and i'm nott sure if there isn't a faulty connection or if the starter... [Read more]

2

kirby g4 foot switch ?

need to know how to check it, also how to get it out

oreck xl 21 push & pull ?

my oreck got stopped up with a kleenex, took it apart and fixed that put back together & it doesn't want to pu... [Read more]

1

bissell proheat pro-tech 7920j?

I have used my cleaner once,i needed some more shampoo and used another make not relising i should have used ... [Read more]

how can I fix my Kenmore progressive upright model 35923?

Removed the screws on the bottom of my vacuum to remove a clog in the area where the hose attached to the clea... [Read more]

1

how to fix my vacuum cleaner,proaction bagless 1800w?

my vacuum cleaner just stopped working checked the plug and fuse but nothing