Mend > Washing Machines

1

what does te stand for on the lg intellowasher?

what does te stand for on the lg intellowasher WD-1245FHB

1

Kenmore elite calypso SL code?

Tlhe SL code comes up on our washer even thought we use HE detergent. We have had the control motor and contr... [Read more]

1

I own a wf860 and cant get it to work, as it's stuck on test?

I own a wf860 and cant get it to work, as it's stuck on test. when i try to do a wash, it just goes to test on... [Read more]

1

Keeps tripping mains?

When my hotpoint 1300 firstedition attempts to turn the drum it trips every time. Is it the motor or the contr... [Read more]

1

Does my indesit W143S need both hot and cold water?

Does the Indesit W143S need both the hot and cold water hoses connecting to work? The hot one is leaking, can... [Read more]

1

How do I fix my Indesit 1200 WIDL 126?

Can anyone help? The problem I am having is that when the washer/dryer is switched on, the Extra rinse, 1200-6... [Read more]

1

indesit w123?

when ever you turn it on the machine starts to fill with water even if it is not on on a wash cycle? can anyth... [Read more]

5

fault codes for indesit evolution 1400 we 14?

Had a repley to my Q about fault code F02, Many Thanks. But now the machine has changed its mind and keeps com... [Read more]

1

How can i fix my indesit w103?

Our indesit w103 seems to be working until it gets to the spin cycle Then instead of spinning the dial starts... [Read more]

1

How can I fix zanussi jetsystem turbodry 1200 xc?

Washing machine stopped at the spin cycle. The washing machine was emptied of clothes but would not operate in... [Read more]

2

change of drum bearings for zanussi turbodry 1050?

Zanussi 1050 seems to have no flange to remove in order to get to the drum bearings ( inside bearing and seal)... [Read more]

1

not using conditioner?

my indesit is not using the softner

4

Problem with Hotpoint wd420?

Washer drier is just over a year old, is flashing on/off button and also dry high heat and reduce crease butto... [Read more]

1

My Zanussi washing machine is showing E20?

What does this mean? How do i fix the fault?

3

Fisher & Paykel smartdrive- where is the pump?

After washing a sheepskin mat, like I have many times before, the water will not drain, and sits there full. T... [Read more]

1

how do i get my filter out of Phillips Whirlpool AWG995?

Ive located my filter which is at the front of my machine but im having problems getting the filter out is it ... [Read more]

1

Zanussi FL1082 sticks in cycle and switches off?

When I click on a wash cycle (g) the cycyle begins, then as the dial just passes "H" the machine stops and the... [Read more]

1

WHAT DOES F02 FAULT CODE MEAN?

MY INDESIT HAS STUCK MID CYCLE ON DRAINING AND IS SHOWING THE FAULT CODE F02. WHAT DOES THIS MEAN ?. INDESI... [Read more]

1

how can i replace the drum bearings on a hotpoint aquarius 1000 washing mac?

The bearings on the rear of the drum require replaceing on first inspection it apears that the drum might have... [Read more]

1

wHEN TANK FILLS AFTER FIRST SPIN THE WATER DOES NOT STOP?

wATER LEVEL IS NOT BEING RECOGNIZED SO WHEN i LEAVE THE ROOM THE WATER RUNS UNTIL i COME BACK.tHE FIRST TIME i... [Read more]