Mend > Tractors

sort engine?

sort problem with engine engine starts but lack of power when thortle turned up and when trying to use engine ... [Read more]

1

how to hook up my ford 4000 generator?

my generator isnt wired up.the wires are kinda tore up and just hanging there.where do they go?[ford 4000 dies... [Read more]

New Holland Fault Code error?

I was wondering what the fault code error 14 is for a New Holland TN65S .Have solved the other codes and this ... [Read more]

timber king logsplitter with john s barnes hyd. pump?

starts and runs good but will not split wood,bypass valve problem? john s barnes hydraulic pump

how can i fix a lucas injector pump?

i have a lucas injector pump....i tested the pumps cc's output on my pump tester....its up around 75cc's (perf... [Read more]

1

hydraulics major deisel?

lift arms pick up lighter loads.under heavy loads goes up 1-2 feet then stops.if you lift up the load with som... [Read more]

1

how to remove drum from big diesel mixer?

has anyone here taken the drum off a big diesel mixer?does the big plate inside the drum unscrew?lift out?so i... [Read more]

2

1983 JCB 3cx drive problem (semi-automatic!!!!)?

Got a 1983 4WD sitemaster with the horrid semi-auto gearbox which will not move forwards or backwards. initial... [Read more]

Matbro TR200 hydraulic noise and oil leaking out of filler cap?

Matbro TR200 hydraulic noise and oil leaking out of filler cap

1

cannot select high ratio on john deere2140?

John Deere 2140, cannot select high ratio on gearbox lever moves but nothing when i let clutch out low ratio i... [Read more]

4

notchy steering on my jcb 3c?

Hi i have just bought an old jcb 3c 11. the power steering seems to work but it is very jerky when turning. ie... [Read more]

1

how do you prime a simms inline diesel pump?

how can i prime a 1965 simms p-4665 diesel fuel pump for a ford 3000 tractor?

How can I correct error code CP on my NewHolland 7840 SLDP?

I have error code cp on my New Holland 7840 SLDP. I have changed the clutch pedal switch and the potentiomete... [Read more]

I got an 8670 showing a code of F 321...what is that code?

Got an 8670 with a code showing F 321 what is that code?

howard 300 rotavator ?

my clutch cable has gone loose how do i fix it , its not the cable broke something has come off or god nos

hydrolics? fordson major diesel 1958?

very slow and not much power on lifting arms

1

ford 655 backhoe ?

after shutting it off now it turns over but it will not start. changed the fuel filter but it still will not f... [Read more]

2

I have 1997 New Holland 6640. what does error code E54 mean?

What does error coe E54 mean? I have 1997 New Holland 6640 cab tractor.

1

how can i fix new holland 8160?

erro f37 is cumming up changed forward and reverse leaver and the switch on clutch peddle and still not solove... [Read more]

John Deere 2555 Hydraulics?

My JD 2555 pressure Transmission light is on. Everything seems to be working ok, Trans shifts, pto works, 3 pn... [Read more]