Mend > Tractors

1

jcb?

Hi I have a 1999 jcb 3cx turbo I dont think the turbo is kicking in as the engine seems a bit slugish any ide... [Read more]

1

rocker shaft of a 4450 John Deere Tractor?

How do I replace the seals on the rocker shaft on a 4450 John Deere tractor?

jcb 210s loader backhoe 2001?

when tractor is cold reverse works good. after roughly 5 minutes of runing reverse guits working . i changed t... [Read more]

1

what do codes e37 and 66 mean on my new holland 8360 tractor?

what the codes e 37 and 66 mean on my new holland 8360 tractor?

test 2 ?

test 2 keeps coming up on control panel... machine wont start...

Hydrostat transmission on LT 1045?

I have an LT 1045 CC and the transmission does not seem to fully engage. It will barely make it up a small hi... [Read more]

2

Troublesome tractor code definition?

What does the 14101 code mean on a 2004 case ih mxu 135?

1

98 new holland 8360 loss of all drive and hydraulics?

hi i have a 98 new holland 8360 i was driveing along when i lost drive suddenly and all hydraulics. no bangs o... [Read more]

3

daf 85 cf cut out now just cranks over ?

daf 85 cf cut out on road now just cranks over changed fuel filter no fuel at the injector nuts help ?

jcb3cx white cab hydraulic pressure problem?

i am getting 200 bar pressure to the front bucket but only 120 bar to the excavator at the back despite the ma... [Read more]

Farmall M?

how do I put new shifting forks in my tractor and do I have to split the frame to do it

1

Grease seal?

How to fix one

2

ls 170 nh skidloader wiring diagram?

i need a wiring diagram for a nh ls 170 skidloader..thanks

1

Dynamo Light On?

I have a Ford 4000, mid 1970's. I have fitted a new dynamo but find that the light on the dash remains on, as... [Read more]

how can i fix brakes on my jcb 412s?

i have a jcb 412s year 96 the brake are working fine but when you press the brake they want to throw you throu... [Read more]

1

error code E62?

New Holland TS 100 shows error code E62 when appears will not go frowards or reverse. If you turn the tractor ... [Read more]

pto shaftgreaseseal?

I have a faRMALL B tractor and the pto shaft seal seems too big for where it goes. Is there a special trick f... [Read more]

whats wrong?

f77 came up on the range command screen and it won't go into the c range, its a new holland 155, whats wrong

1

jcb 801 starter motor?

put a new battery on but still turns over really slow

2

How do I diagnose a won't lift problem with David Brown 990 Hydraulic lift?

My David Brown 990 tractor is refusing to raise the 3 Pt hitch. The time before when I used it the hydrauli... [Read more]