How to mend Boiler Fit Valve

1

Worcester 28si boiler top up?

I have a very old worester 28si and the pressure is down to around 0.4 i cannot figure out how to up the press... [Read more]

3

Boiler Hot water intermittently losing temp, Heating seems fine?

The title explains the main issue, for some reason the hot water drops often every 20 secs or so, sometimes it... [Read more]

Baxi solo 3 turning on and off?

The boiler only stays on for around one minute, then off then on again. Whilst on all lights except overheat a... [Read more]

2

Suprima 50 HE No lights unless Gas Valve disconnected?

Hi, I have a Suprima 50 HE boiler that decided to stop working yesterday. When I got to it, all 3 lights w... [Read more]

1

Can I add a 400mm by 1200 rad to a system which has 4 rads on?

Can I add a 400mm by 1200 rad to a system which has 4 rads on at the moment and which end of rad will I need t... [Read more]

how is the diaprham fitted into the valve on a stelrad boiler?

need to know how the diaprham is fitted into the valve housing an which way the springs fit

3

converting to sealed system?

Would it be advisable to convert my heating system to a sealed type? The reason I ask is my boiler often makes... [Read more]

how can i adjust the d.h.w blending valve on my powermax 155x combi boiler?

I need to reduce the tempriture of the domestic hot water to 43/45 0c at the draw of taps etc from the pre set... [Read more]

2

Help with Worcester greenstar ri?

Hi, drained a central heating vented system today to fit a new rad valve, turned the cold water back on and re... [Read more]

Help with Worcester greenstar ri?

Hi, drained a central heating vented system today to fit a new rad valve, turned the cold water back on and re... [Read more]

Potterton Performa 28 hot water / central heating issue?

I wonder if any of you can help please? For some months now, whenever I run hot water, the central heating com... [Read more]

ravenheat csi 85a-csi 85at combi boiler?

I have the above mentioned combi boiler, the heating has now stopped working, DHW is running fine. I have noti... [Read more]

B&Q Silverstar Boiler, main fuse blowing, losing pressure slowly?

Hi - All help is greatly appreciated as I am lost at the minute with this problem. My Boiler stopped workin... [Read more]

1

what pipe do I use to fit to the blowoff valve on a britony 80?

I need to fit a pipe to the blowoff valve on my britony 80 boiler. British Gas says it needs to be in copper... [Read more]

how do i replace an automatic air release valve on my powermax?

the boiler is a powermax 155 sealed system (FFS 155 CP) The auto air vent is weeping. I have purchase a new on... [Read more]

firebird heatpac 70-90 oil boiler leak?

There is water flowing out of overflow safety valve in boiler it also has a pressure gauge on it.Could this ju... [Read more]

How do I fit a new diaphragm to RFS 820/20 boiler?

What is the procedure for fitting a new Diaphragm (part no. 5012051) for a 3 way valve on a RFS 820/20 Ravenh... [Read more]

4

Problem with the diverter valve - vaillant turbo max boiler?

My boiler is 13 years old but in good condition so I don't want to replace it. We've replaced the diverter va... [Read more]

1

New loop?

Can I fit a new loop to my 100e that has a tap at both ends? The current one has a tap at the inlet and a non-... [Read more]

2

Up grading Potterton Profile?

Currently we have a Potterton Profile 55e that works well and is very reliable. Due to changes in the layou... [Read more]