Thank u drive with Ken...simple answer to my problem only place on the net I found it woop woop!
Kat
July 2010
My bobbin thread wasn't catching because the tension was too tight, so the needle couldn't catch the thread. This was pretty unclear in the instructions, but I was finally able to find an illustration on how to loosen it. I had to take a tiny screwdriver and loosen the screw for the bobbin, and once I had loosened it and placed it back in, I was able to catch the thread with the needle.
J
December 2009
Hello Donna,
Make sure you have the bobbin in the correct way round so it turns anti clockwise