Tecumseh vantage 35 perf power 420 operators manual?
Hi, i need an operators manual for the above machine which my father has acquired, the engine no is Van 148, E36142D, S0049A - can you help ? or do you have a copy you could send to me?
4 strokes don't used mixed fuel - straight unleaded will be fine.
Don't forget to check the oil level in the sump before each use.
Phil Saunders
March 2009
Thanka for that, my dad has managed to get it going now !! can you advise on what thew fuel mixture should be for this 4 stroke model number Van 148 E36142D, S0049A?
Thanks
Sarah Neill
March 2009
Check sump is filled to the correct level with correct oil.
Fill fuel tank with fresh unleaded petrol
Press the primer on the side of the carburettor 6 to 10 times
Set throttle speed (where fitted) to high position.
Pull in safety engine cut-out lever (opc) if fitted.
Firmly grasp the recoil rope handle and rapidly pull towards you until engine starts.
To stop engine simply let go of safety cut-out lever.
pleasant
March 2009
My dad needs to know how to start it up
sarah neill
March 2009
There isn't one. Why do you need an operators manual for a performance power?
pleasant
March 2009
I can answer this question...
Tecumseh vantage 35 perf power 420 operators manual?