Mend > Sewing Machines

How can I fix my Frister Rossmann Sewing Machine?

The motor and hand wheel are turning OK but the Take up Lever is fixed and does not move up and down. The problem seems to be with the drive between the hand wheel and the take up lever which I assume should rotate to move the take up lever. Any Ideas? The machine model is a Beaver 3.

C. J
April 2014

Frister Rossmann Frister Rossmann Beaver 3 Household Appliances, Sewing Machines Frister Rossmann Machine

Question:

about overlock sewing machine 055D. the handwheel is jammed. have undone most parts, oiled it yet not moving. Any advice would appreciated.

Ch
December 2022

Access and replace light

Judy
October 2016

Sounds definitely like the stop motion washer in the hand wheel, undo the screw in the handwheel and unscrew the stop motion centre wheel all the way off, there will be a 3 pronged washer, take it off and put it in a different position then put the stop motion centre wheel back on and only turn it slightly finger tight, put the screw back in and then give the stop motion centre wheel a bit more turn and it should be tight, if it is not take it all off again and put the washer in a different position, also make sure you do not have any thread stuck in the raceway area

ken
April 2014