Bernina type 286 foot pedal?

I removed the 750uF cap and it still doesn't work. Whilst the cap was connected the machine would give a little jump start then stop. With the cap disconnected the motor doesn't jump. This cap is external to the circuit board and is connected to one side of the micro switch and the middle terminal of the plug coming from the machine. Any ideas ? Thanks.

Graham
January 2017

It's just a capacitor - nothing more - a defective capacitor - remove it and don't bother replacing it - it's in the circuit just to act as a spark suppressor - to prevent radio interference - no other purpose - you will not notice that it's gone.

Well diagnosed...

Good Luck...
January 2017