yup. i tried 9735. worked first time. just select region 0 and you're set.
cheers maccas
Danny-Boi
July 2007
Actually after sitting down for ages I discovered this above formula doesn't work. U need to :
1. make sure no disc is in unit
2. enter 9735
3. select Region 0 (will play all regions)
4. press enter
5. exit setup
And bob's your uncle!! Enjoy.
maccas
April 2007
Conia M250/M560
1. Turn on power, make sure there is "no disc" shown on display
2. Press "9758" on remote facing the player then press enter.
3.Select "0" for all region, then press enter.
4.Press exit from menu.
5. Player has been set for all region.
I had to try a few times to get it to work. At first I was entering the numbers to quickly. Good Luck.