How to mend Bobbin Thread Side

1

How can I tighten the drive belt(s) on my Frosted /Rossman64 sewing machine?

I acquired a second hand F/R 64, model no' 507, serial no' 5009293. An electrician friend helped oil, grease a... [Read more]

my Singer 2001 touch tronic winds the thread underneath the bobbin ?

It winds the thread underneath the bobbin instead of on the bobbin, also when I sew, after a few stitches it w... [Read more]

1

singer9005 sewing machines?

thread balls up on under side of stitching. Bobbin tensen isnt set right.

8

Zig zag stitch not working \singer confidence 7470?

My relatively new Singer confidence 7470 has stopped zig zagging! the needle moves from side to side as it sho... [Read more]

1

How do I set the timing on a Singer 201K?

My 201k has worked well for a long time. Now it knocks hard as soon as it starts to sew although it is perfect... [Read more]

1

Loose Loops on Bottom, How can I fix this? ?

The top thread on my machine leaves loops on the bottom side of the fabric. I have threaded needle with foot u... [Read more]

2

kenmore sewing machine #385 model #1278180?

thread on bottom side of fabric suddenly became very loopy/tangled. I tried turning the top tension knob all t... [Read more]

1

How do I adjust the bobbin tension in my 730 Bernina?

I am sewing on a 730 Bernina and believe I need to adjust the bobbin tension. There are two screws on my bobb... [Read more]

1

Picking up bobbin thread?

I have borrowed a Singer Touch and Sew Model 626 and am out of the country without any manual. I cannot get t... [Read more]

2

singer 5528 is eating my bobbin thread!!!?

i think it's a tension problem but i have no idea how to fix it. it's an old-school machine and way out of my ... [Read more]

1

How to fix the tension on an ELna 8000??

I have an ELna 8000, for years worked great. Now the tension is kaflooey. The lower thread is pulling up to th... [Read more]

1

Brother XL 3520 not picking up bobbin thread on zig zag?

Hi, I have just aquired a Brother XL 3520 and the straight stitch is fine, however if I try to zig zag or any ... [Read more]

3

singer touchtronic 2010 bobbin thread jam?

why does the thread get all jammed on the under side of the fabric i am not sure if i have the bobbin threade... [Read more]

1

Why is my bobbin case jumping about?

I have an E&R classic model KPN400. It has a bobbin case which you put in the side. It has started jumping a... [Read more]

3

Hand heel spins freely jamming needle in down position?

I have an older kenmore sewing machine and while sewing it will stop in the down position and then the hand wh... [Read more]

3

Lervia KH4000?

I have a lervia kh4000 everything was working great until I changed the lower thread colour on the bobbin, pri... [Read more]

6

I have a singer 457 zig zag which is not threading/ catching the bobbin??

I have only just got this machine and am trying to thread the bobbin so that the needle can catch it. Its not ... [Read more]

1

How do I thread the nylon cord?

Every time I thread the nylon cord of my strimmer, it fails as soon as I start using it and I find the thread ... [Read more]

1

how do I switch the direction of the knob on the right of the machine?

I was trying to re-thread the bobbin and I turned the knob on the right side of the machine and now when I pre... [Read more]

2

Bobbin Holder keeps slipping past stopper on my Janome 6260 Sewing Machine?

Janome 6260 Quilter's Companion Sewing Machine: The bobbin holder must be inserted into the hook race in such... [Read more]