Mend > Vacuum Cleaners

5

Electrolux Model 2100 vacum sweeper with Power head Model 7B?

When I connect the vacum sweeper to the wall outlet, it runs fine but does not pick anything up. There seems t... [Read more]

1

dyson cylinder vacum cleaner dc05?

My brother in law was using the vacum cleaner. When he was trying to get more cable he pulled sharply from th... [Read more]

3

My Dyson DC04 makes a shrieking noise. What is it afraid of?

My Dyson DC04 makes an ear-splitting shriek shortly after starting, and suction is impaired. Can anyone sugges... [Read more]

2

Dyson keeps cutting out!?

Help after about 1 minute our upright Dyson stops working.and will not resume after 5 minutes or so..I suspect... [Read more]

1

How can I fix my dyson all floor model?

I need to know if there is anyway to have my dyson's cord replaced as it is starting to shred apart?

7

How do you take apart the cyclone on a dyson dc14 animal?

I can tell there is a clog in the cyclone of my dyson dc14 animal. I have tried to blow it out by using compre... [Read more]

2

HOW DO I OPEN THE EUREKA WHIRLWIND BAGLESS MODEL 4388 B-2 TO FIX MY BELT?

MY EUREKA WHIRLWIND BAGLESS MODEL 4388 B-2 BRUSH IS NOT MOVING. HOW DO I OPEN IT TO CHECK THE BELT? I HAVE CLE... [Read more]

1

HOW DO I REPAIR/REPLACE THE FUSE IN VAX MACHINE?

THE VAX CARPET CLEANER V-025 NO LONGER WORKS. WE BELIEVE THE FUSE HAS BLOWN INSIDE WHICH SEEMS TO BE SEALED. ... [Read more]

1

How do I remove the Outer Clutch Actuator on DC14 Animal?

I am trying to replace the clutch assembly and am having one heck of time removing the Outer Clutch Actuator (... [Read more]

8

Dyson Dc07 brush not turning. Belt seems to be intact. Any ideas?

Dyson Dc07 brush not turning. Belt seems to be intact. Any ideas.

3

how to replace belt on dyson DC14 vacuum?

how to replace belt on dyson DC14 vacuum

1

how can i fix my kirby generation 4?

The kirby has some suction but not as it should be on carpet. Won't pick up dog hairs and pieces of thread etc... [Read more]

2

Where can I get new spade connectors for my Dyson Dc04?

The cable had broken close to the switch entry which meant the cable had to be shortened which then needed new... [Read more]

2

how ato fix a vacuum that smokes?

My vacuum smokes from where the belt is and has not suction what could be the problem?

1

Little green light?

I have a kirby G3 and I do not know what the little green light on the front roller housing is for. It goes o... [Read more]

2

electrolux elite canister schematic?

I am looking for a schematic for an electrolux canister vac. I have one that cuts off if you put a hand over t... [Read more]

2

No suction when motor is running?

Bissell Powerwash Proheat. Motor runs, brush turns, formula sprays but no suction. Any ideas?

6

bissell lift off bagless vacuum cleaner?

How do i mend the revolving brush ? the vacuum is working and sucking but the beater bar/brush is not spinning... [Read more]

2

I also want to replace the motor on our Dyson DC07; can it be done as DIY?

I am OK with DIY and have striped the cleaner down to as least posssible but now need special alan key type to... [Read more]

1

electrolux Epic series 6500?

Unit does not turn on. The light with a ? goes on. I repaired the plug and wiring is solid.